This configuration file for the Triad Garden Array is a device file which contains two presets, one for an above-ground sub configuration and one for a below-ground sub. 
To load the Crown Amp device file, you need to dowload and install the Harmon HiQnet Audio Architect software.
A link to the Harmon software can be found at http://triadspkrs.co/gardenarray

To open a preset or device file in Audio Architect:
1.	Go online with the device. You must be online for the settings to be sent down to the actual device. See "Going Online" in the CDi DriveCore Manual for instructions on going online.
2.	Open the Main CDi DriveCore Control panel.
3.	Select "File | Open | Device File” to open a device file. Or, select "File | Open | Preset File” to open a preset file.
4.	If opening a device file, proceed to the next step. If opening a preset file, the below window will appear. From the "Load into preset:" dropdown menu, select the preset location to which you wish to load the preset. Click Select, navigate to the folder containing the preset file, select the file (preset 2 for sats and below-ground sub or preset 3 for sats and above-ground sub), then click Open. Now click OK. The preset file has now been loaded. 
5.	When the Open prompt appears, navigate to the folder containing the device file, select the file, then click Open. The device file has now been opened and all presets and applicable settings will be reflected in the device.

To load a device preset from the front panel:
1.	From the Home screen, press the MENU button.
2.	Select the "Configure Amplifier" option from the menu using the ENCODER.
3.	Select the "Load Preset" option.
4.	Use the ENCODER to navigate presets using the on-screen "PREV" and "NEXT" buttons. As each preset is selected, the preset number, name, and configuration will bedisplayed on-screen.
5.	Once the desired preset has been selected, use the ENCODER to select "LOAD".
For information on loading device presets in Audio Architect, see "Main CDi DriveCoreControl Panel" in the CDi DriveCore Manual.

Rev C 11/29/2018 DH